| Class | rad_simple | 
| In: | radiation/rad_simple.f90 | 
Note that Japanese and English are described in parallel.
This is a simple radiation model.
| !$ ! RadiationFluxDennouAGCM : | 放射フラックスの計算 | 
| !$ ! RadiationDTempDt : | 放射フラックスによる温度変化の計算 | 
| !$ ! RadiationFluxOutput : | 放射フラックスの出力 | 
| !$ ! RadiationFinalize : | 終了処理 (モジュール内部の変数の割り付け解除) | 
| !$ ! ———— : | ———— | 
| !$ ! RadiationFluxDennouAGCM : | Calculate radiation flux | 
| !$ ! RadiationDTempDt : | Calculate temperature tendency with radiation flux | 
| !$ ! RadiationFluxOutput : | Output radiation fluxes | 
| !$ ! RadiationFinalize : | Termination (deallocate variables in this module) | 
| Subroutine : | |
| xy_SurfAlbedo( 0:imax-1, 1:jmax ) : | real(DP), intent(in ) | 
| xy_SurfTemp( 0:imax-1, 1:jmax ) : | real(DP), intent(in ) | 
| xyr_Press( 0:imax-1, 1:jmax, 0:kmax ) : | real(DP), intent(in ) | 
| xyz_Press( 0:imax-1, 1:jmax, 1:kmax ) : | real(DP), intent(in ) | 
| xyz_Temp( 0:imax-1, 1:jmax, 1:kmax ) : | real(DP), intent(in ) | 
| xyz_QH2OVap( 0:imax-1, 1:jmax, 1:kmax ) : | real(DP), intent(in ) | 
| xyr_RadSUwFlux( 0:imax-1, 1:jmax, 0:kmax ) : | real(DP), intent(out) | 
| xyr_RadSDwFlux( 0:imax-1, 1:jmax, 0:kmax ) : | real(DP), intent(out) | 
| xyr_RadLUwFlux(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(out) | 
| xyr_RadLDwFlux(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(out) | 
| xyra_DelRadLUwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1) : | real(DP), intent(out) | 
| xyra_DelRadLDwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1) : | real(DP), intent(out) | 
  subroutine RadSimpleFlux( xy_SurfAlbedo, xy_SurfTemp, xyr_Press, xyz_Press, xyz_Temp, xyz_QH2OVap, xyr_RadSUwFlux, xyr_RadSDwFlux, xyr_RadLUwFlux, xyr_RadLDwFlux, xyra_DelRadLUwFlux, xyra_DelRadLDwFlux )
    ! USE statements
    !
    ! 物理・数学定数設定
    ! Physical and mathematical constants settings
    !
    use constants0, only: PI                    ! $ \pi $ .
                              ! 円周率.  Circular constant
    !
    ! Physical constants settings
    !
    use constants, only: Grav     ! $ g $ [m s-2].
                                  !
                                  ! Gravitational acceleration
    ! 座標データ設定
    ! Axes data settings
    !
    use axesset, only : y_Lat
    ! 短波入射 (太陽入射)
    ! Short wave (insolation) incoming
    !
    use rad_short_income, only : RadShortIncome
    !
    ! Solve radiative transfer equation in two stream approximation
    !
    use rad_rte_two_stream_app, only: RadRTETwoStreamApp, IDSchemeShortWave
    ! 長波フラックスの計算
    ! Calculate long wave flux
    !
    use rad_simple_LW, only : RadSimpleLWFlux
    real(DP), intent(in ) :: xy_SurfAlbedo( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xy_SurfTemp  ( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xyr_Press    ( 0:imax-1, 1:jmax, 0:kmax )
    real(DP), intent(in ) :: xyz_Press    ( 0:imax-1, 1:jmax, 1:kmax )
    real(DP), intent(in ) :: xyz_Temp     ( 0:imax-1, 1:jmax, 1:kmax )
    real(DP), intent(in ) :: xyz_QH2OVap  ( 0:imax-1, 1:jmax, 1:kmax )
    real(DP), intent(out) :: xyr_RadSUwFlux    ( 0:imax-1, 1:jmax, 0:kmax )
    real(DP), intent(out) :: xyr_RadSDwFlux    ( 0:imax-1, 1:jmax, 0:kmax )
    real(DP), intent(out) :: xyr_RadLUwFlux    (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyr_RadLDwFlux    (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyra_DelRadLUwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1)
    real(DP), intent(out) :: xyra_DelRadLDwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1)
    ! Work variables
    !
    real(DP) :: DistFromStarScld
                               ! Distance between the central star and the planet
    real(DP) :: DiurnalMeanFactor
    real(DP) :: SolarFluxTOA
!!$    real(DP) :: QeRatio
    real(DP) :: xyz_SSA       (0:imax-1, 1:jmax, 1:kmax)
    real(DP) :: xyz_AF        (0:imax-1, 1:jmax, 1:kmax)
    real(DP) :: xy_InAngle    (0:imax-1, 1:jmax)
    real(DP) :: xyz_DelAtmMass(0:imax-1, 1:jmax, 1:kmax)
    real(DP) :: xyr_OptDep    (0:imax-1, 1:jmax, 0:kmax)
    real(DP) :: xy_SurfEmis  (0:imax-1, 1:jmax)
    integer  :: k
    ! 初期化
    ! Initialization
    !
    if ( .not. rad_Simple_inited ) call RadSimpleInit
    ! Short wave radiation
    !
    ! 短波入射の計算
    ! Calculate short wave (insolation) incoming radiation
    !
    call RadShortIncome( xy_InAngle        = xy_InAngle, DistFromStarScld  = DistFromStarScld, DiurnalMeanFactor = DiurnalMeanFactor )
    SolarFluxTOA = SolarConst / DistFromStarScld**2 * DiurnalMeanFactor
    xyz_SSA    = 1.0_DP - 1.0d-10
    xyz_AF     = 0.0_DP
    xyr_OptDep = 0.0_DP
    call RadRTETwoStreamApp( xyz_SSA, xyz_AF, SolarFluxTOA, xy_SurfAlbedo, IDSchemeShortWave, xy_InAngle, xyr_OptDep, xyr_RadSUwFlux, xyr_RadSDwFlux )
    ! Long wave radiation
    !
    do k = 1, kmax
      xyz_DelAtmMass(:,:,k) = ( xyr_Press(:,:,k-1) - xyr_Press(:,:,k ) ) / Grav
    end do
    xy_SurfEmis = 1.0_DP
    call RadSimpleLWFlux( xy_SurfEmis, xyz_Temp, xyz_Press, xy_SurfTemp, xyz_DelAtmMass, xyz_QH2OVap, xyr_RadLUwFlux, xyr_RadLDwFlux, xyra_DelRadLUwFlux, xyra_DelRadLDwFlux )
  end subroutine RadSimpleFlux
          | Subroutine : | 
This procedure input/output NAMELIST#rad_Simple_nml .
  subroutine RadSimpleInit
    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen
    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid
    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify
    ! 短波入射 (太陽入射)
    ! Short wave (insolation) incoming
    !
    use rad_short_income, only : RadShortIncomeInit
    ! 放射フラックス (簡単長波バンドモデル)
    ! Radiation flux (simple longwave band model)
    !
    use rad_simple_LW, only : RadSimpleLWInit
    ! 宣言文 ; Declaration statements
    !
    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号.
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT.
                              ! IOSTAT of NAMELIST read
    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /rad_Simple_nml/ SolarConst
          !
          ! デフォルト値については初期化手続 "rad_Simple#RadSimpleInit"
          ! のソースコードを参照のこと.
          !
          ! Refer to source codes in the initialization procedure
          ! "rad_Simple#RadSimpleInit" for the default values.
          !
    ! デフォルト値の設定
    ! Default values settings
    !
!!$    SWOptDepAtRefPress =  3.0_DP
!!$    SWRefPress         =  3.0d5
!!$    SWOrd              =  1.0_DP
!!$
!!$    LWOptDepAtRefPress = 80.0_DP
!!$    LWRefPress         =  3.0d5
!!$    LWOrd              =  2.0_DP
    SolarConst         = 1366.0_DP
    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)
      rewind( unit_nml )
      read( unit_nml, nml = rad_Simple_nml, iostat = iostat_nml )             ! (out)
      close( unit_nml )
      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if
    ! Initialization of modules used in this module
    !
    ! 短波入射 (太陽入射)
    ! Short wave (insolation) incoming
    !
    call RadShortIncomeInit
    ! 放射フラックス (簡単長波バンドモデル)
    ! Radiation flux (simple longwave band model)
    !
    call RadSimpleLWInit
    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
!!$    call MessageNotify( 'M', module_name, 'SWOptDepAtRefPress = %f', d = (/ SWOptDepAtRefPress /) )
!!$    call MessageNotify( 'M', module_name, 'SWRefPress         = %f', d = (/ SWRefPress /) )
!!$    call MessageNotify( 'M', module_name, 'SWOrd              = %f', d = (/ SWOrd /) )
!!$    call MessageNotify( 'M', module_name, 'LWOptDepAtRefPress = %f', d = (/ LWOptDepAtRefPress /) )
!!$    call MessageNotify( 'M', module_name, 'LWRefPress         = %f', d = (/ LWRefPress /) )
!!$    call MessageNotify( 'M', module_name, 'LWOrd              = %f', d = (/ LWOrd /) )
    call MessageNotify( 'M', module_name, 'SolarConst         = %f', d = (/ SolarConst /) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )
    rad_Simple_inited = .true.
  end subroutine RadSimpleInit
          | Variable : | |||
| rad_simple_inited = .false. : | logical, save, public 
 | 
| Constant : | |||
| version = ’$Name: dcpam5-20120301 $’ // ’$Id: rad_simple.f90,v 1.2 2012-02-01 05:19:53 yot Exp $’ : | character(*), parameter 
 |