DOUBLE PRECISION routines for symmetric or Hermitian positive definite, packed storage matrix

dppcon

USAGE:
  rcond, info = NumRu::Lapack.dppcon( uplo, ap, anorm, [:usage => usage, :help => help])


FORTRAN MANUAL
      SUBROUTINE DPPCON( UPLO, N, AP, ANORM, RCOND, WORK, IWORK, INFO )

*  Purpose
*  =======
*
*  DPPCON estimates the reciprocal of the condition number (in the
*  1-norm) of a real symmetric positive definite packed matrix using
*  the Cholesky factorization A = U**T*U or A = L*L**T computed by
*  DPPTRF.
*
*  An estimate is obtained for norm(inv(A)), and the reciprocal of the
*  condition number is computed as RCOND = 1 / (ANORM * norm(inv(A))).
*

*  Arguments
*  =========
*
*  UPLO    (input) CHARACTER*1
*          = 'U':  Upper triangle of A is stored;
*          = 'L':  Lower triangle of A is stored.
*
*  N       (input) INTEGER
*          The order of the matrix A.  N >= 0.
*
*  AP      (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          The triangular factor U or L from the Cholesky factorization
*          A = U**T*U or A = L*L**T, packed columnwise in a linear
*          array.  The j-th column of U or L is stored in the array AP
*          as follows:
*          if UPLO = 'U', AP(i + (j-1)*j/2) = U(i,j) for 1<=i<=j;
*          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = L(i,j) for j<=i<=n.
*
*  ANORM   (input) DOUBLE PRECISION
*          The 1-norm (or infinity-norm) of the symmetric matrix A.
*
*  RCOND   (output) DOUBLE PRECISION
*          The reciprocal of the condition number of the matrix A,
*          computed as RCOND = 1/(ANORM * AINVNM), where AINVNM is an
*          estimate of the 1-norm of inv(A) computed in this routine.
*
*  WORK    (workspace) DOUBLE PRECISION array, dimension (3*N)
*
*  IWORK   (workspace) INTEGER array, dimension (N)
*
*  INFO    (output) INTEGER
*          = 0:  successful exit
*          < 0:  if INFO = -i, the i-th argument had an illegal value
*

*  =====================================================================
*


    
go to the page top

dppequ

USAGE:
  s, scond, amax, info = NumRu::Lapack.dppequ( uplo, ap, [:usage => usage, :help => help])


FORTRAN MANUAL
      SUBROUTINE DPPEQU( UPLO, N, AP, S, SCOND, AMAX, INFO )

*  Purpose
*  =======
*
*  DPPEQU computes row and column scalings intended to equilibrate a
*  symmetric positive definite matrix A in packed storage and reduce
*  its condition number (with respect to the two-norm).  S contains the
*  scale factors, S(i)=1/sqrt(A(i,i)), chosen so that the scaled matrix
*  B with elements B(i,j)=S(i)*A(i,j)*S(j) has ones on the diagonal.
*  This choice of S puts the condition number of B within a factor N of
*  the smallest possible condition number over all possible diagonal
*  scalings.
*

*  Arguments
*  =========
*
*  UPLO    (input) CHARACTER*1
*          = 'U':  Upper triangle of A is stored;
*          = 'L':  Lower triangle of A is stored.
*
*  N       (input) INTEGER
*          The order of the matrix A.  N >= 0.
*
*  AP      (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          The upper or lower triangle of the symmetric matrix A, packed
*          columnwise in a linear array.  The j-th column of A is stored
*          in the array AP as follows:
*          if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
*          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
*
*  S       (output) DOUBLE PRECISION array, dimension (N)
*          If INFO = 0, S contains the scale factors for A.
*
*  SCOND   (output) DOUBLE PRECISION
*          If INFO = 0, S contains the ratio of the smallest S(i) to
*          the largest S(i).  If SCOND >= 0.1 and AMAX is neither too
*          large nor too small, it is not worth scaling by S.
*
*  AMAX    (output) DOUBLE PRECISION
*          Absolute value of largest matrix element.  If AMAX is very
*          close to overflow or very close to underflow, the matrix
*          should be scaled.
*
*  INFO    (output) INTEGER
*          = 0:  successful exit
*          < 0:  if INFO = -i, the i-th argument had an illegal value
*          > 0:  if INFO = i, the i-th diagonal element is nonpositive.
*

*  =====================================================================
*


    
go to the page top

dpprfs

USAGE:
  ferr, berr, info, x = NumRu::Lapack.dpprfs( uplo, ap, afp, b, x, [:usage => usage, :help => help])


FORTRAN MANUAL
      SUBROUTINE DPPRFS( UPLO, N, NRHS, AP, AFP, B, LDB, X, LDX, FERR, BERR, WORK, IWORK, INFO )

*  Purpose
*  =======
*
*  DPPRFS improves the computed solution to a system of linear
*  equations when the coefficient matrix is symmetric positive definite
*  and packed, and provides error bounds and backward error estimates
*  for the solution.
*

*  Arguments
*  =========
*
*  UPLO    (input) CHARACTER*1
*          = 'U':  Upper triangle of A is stored;
*          = 'L':  Lower triangle of A is stored.
*
*  N       (input) INTEGER
*          The order of the matrix A.  N >= 0.
*
*  NRHS    (input) INTEGER
*          The number of right hand sides, i.e., the number of columns
*          of the matrices B and X.  NRHS >= 0.
*
*  AP      (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          The upper or lower triangle of the symmetric matrix A, packed
*          columnwise in a linear array.  The j-th column of A is stored
*          in the array AP as follows:
*          if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
*          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
*
*  AFP     (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          The triangular factor U or L from the Cholesky factorization
*          A = U**T*U or A = L*L**T, as computed by DPPTRF/ZPPTRF,
*          packed columnwise in a linear array in the same format as A
*          (see AP).
*
*  B       (input) DOUBLE PRECISION array, dimension (LDB,NRHS)
*          The right hand side matrix B.
*
*  LDB     (input) INTEGER
*          The leading dimension of the array B.  LDB >= max(1,N).
*
*  X       (input/output) DOUBLE PRECISION array, dimension (LDX,NRHS)
*          On entry, the solution matrix X, as computed by DPPTRS.
*          On exit, the improved solution matrix X.
*
*  LDX     (input) INTEGER
*          The leading dimension of the array X.  LDX >= max(1,N).
*
*  FERR    (output) DOUBLE PRECISION array, dimension (NRHS)
*          The estimated forward error bound for each solution vector
*          X(j) (the j-th column of the solution matrix X).
*          If XTRUE is the true solution corresponding to X(j), FERR(j)
*          is an estimated upper bound for the magnitude of the largest
*          element in (X(j) - XTRUE) divided by the magnitude of the
*          largest element in X(j).  The estimate is as reliable as
*          the estimate for RCOND, and is almost always a slight
*          overestimate of the true error.
*
*  BERR    (output) DOUBLE PRECISION array, dimension (NRHS)
*          The componentwise relative backward error of each solution
*          vector X(j) (i.e., the smallest relative change in
*          any element of A or B that makes X(j) an exact solution).
*
*  WORK    (workspace) DOUBLE PRECISION array, dimension (3*N)
*
*  IWORK   (workspace) INTEGER array, dimension (N)
*
*  INFO    (output) INTEGER
*          = 0:  successful exit
*          < 0:  if INFO = -i, the i-th argument had an illegal value
*
*  Internal Parameters
*  ===================
*
*  ITMAX is the maximum number of steps of iterative refinement.
*

*  =====================================================================
*


    
go to the page top

dppsv

USAGE:
  info, ap, b = NumRu::Lapack.dppsv( uplo, n, ap, b, [:usage => usage, :help => help])


FORTRAN MANUAL
      SUBROUTINE DPPSV( UPLO, N, NRHS, AP, B, LDB, INFO )

*  Purpose
*  =======
*
*  DPPSV computes the solution to a real system of linear equations
*     A * X = B,
*  where A is an N-by-N symmetric positive definite matrix stored in
*  packed format and X and B are N-by-NRHS matrices.
*
*  The Cholesky decomposition is used to factor A as
*     A = U**T* U,  if UPLO = 'U', or
*     A = L * L**T,  if UPLO = 'L',
*  where U is an upper triangular matrix and L is a lower triangular
*  matrix.  The factored form of A is then used to solve the system of
*  equations A * X = B.
*

*  Arguments
*  =========
*
*  UPLO    (input) CHARACTER*1
*          = 'U':  Upper triangle of A is stored;
*          = 'L':  Lower triangle of A is stored.
*
*  N       (input) INTEGER
*          The number of linear equations, i.e., the order of the
*          matrix A.  N >= 0.
*
*  NRHS    (input) INTEGER
*          The number of right hand sides, i.e., the number of columns
*          of the matrix B.  NRHS >= 0.
*
*  AP      (input/output) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          On entry, the upper or lower triangle of the symmetric matrix
*          A, packed columnwise in a linear array.  The j-th column of A
*          is stored in the array AP as follows:
*          if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
*          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
*          See below for further details.
*
*          On exit, if INFO = 0, the factor U or L from the Cholesky
*          factorization A = U**T*U or A = L*L**T, in the same storage
*          format as A.
*
*  B       (input/output) DOUBLE PRECISION array, dimension (LDB,NRHS)
*          On entry, the N-by-NRHS right hand side matrix B.
*          On exit, if INFO = 0, the N-by-NRHS solution matrix X.
*
*  LDB     (input) INTEGER
*          The leading dimension of the array B.  LDB >= max(1,N).
*
*  INFO    (output) INTEGER
*          = 0:  successful exit
*          < 0:  if INFO = -i, the i-th argument had an illegal value
*          > 0:  if INFO = i, the leading minor of order i of A is not
*                positive definite, so the factorization could not be
*                completed, and the solution has not been computed.
*

*  Further Details
*  ===============
*
*  The packed storage scheme is illustrated by the following example
*  when N = 4, UPLO = 'U':
*
*  Two-dimensional storage of the symmetric matrix A:
*
*     a11 a12 a13 a14
*         a22 a23 a24
*             a33 a34     (aij = conjg(aji))
*                 a44
*
*  Packed storage of the upper triangle of A:
*
*  AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ]
*
*  =====================================================================
*
*     .. External Functions ..
      LOGICAL            LSAME
      EXTERNAL           LSAME
*     ..
*     .. External Subroutines ..
      EXTERNAL           DPPTRF, DPPTRS, XERBLA
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          MAX
*     ..


    
go to the page top

dppsvx

USAGE:
  x, rcond, ferr, berr, info, ap, afp, equed, s, b = NumRu::Lapack.dppsvx( fact, uplo, ap, afp, equed, s, b, [:usage => usage, :help => help])


FORTRAN MANUAL
      SUBROUTINE DPPSVX( FACT, UPLO, N, NRHS, AP, AFP, EQUED, S, B, LDB, X, LDX, RCOND, FERR, BERR, WORK, IWORK, INFO )

*  Purpose
*  =======
*
*  DPPSVX uses the Cholesky factorization A = U**T*U or A = L*L**T to
*  compute the solution to a real system of linear equations
*     A * X = B,
*  where A is an N-by-N symmetric positive definite matrix stored in
*  packed format and X and B are N-by-NRHS matrices.
*
*  Error bounds on the solution and a condition estimate are also
*  provided.
*
*  Description
*  ===========
*
*  The following steps are performed:
*
*  1. If FACT = 'E', real scaling factors are computed to equilibrate
*     the system:
*        diag(S) * A * diag(S) * inv(diag(S)) * X = diag(S) * B
*     Whether or not the system will be equilibrated depends on the
*     scaling of the matrix A, but if equilibration is used, A is
*     overwritten by diag(S)*A*diag(S) and B by diag(S)*B.
*
*  2. If FACT = 'N' or 'E', the Cholesky decomposition is used to
*     factor the matrix A (after equilibration if FACT = 'E') as
*        A = U**T* U,  if UPLO = 'U', or
*        A = L * L**T,  if UPLO = 'L',
*     where U is an upper triangular matrix and L is a lower triangular
*     matrix.
*
*  3. If the leading i-by-i principal minor is not positive definite,
*     then the routine returns with INFO = i. Otherwise, the factored
*     form of A is used to estimate the condition number of the matrix
*     A.  If the reciprocal of the condition number is less than machine
*     precision, INFO = N+1 is returned as a warning, but the routine
*     still goes on to solve for X and compute error bounds as
*     described below.
*
*  4. The system of equations is solved for X using the factored form
*     of A.
*
*  5. Iterative refinement is applied to improve the computed solution
*     matrix and calculate error bounds and backward error estimates
*     for it.
*
*  6. If equilibration was used, the matrix X is premultiplied by
*     diag(S) so that it solves the original system before
*     equilibration.
*

*  Arguments
*  =========
*
*  FACT    (input) CHARACTER*1
*          Specifies whether or not the factored form of the matrix A is
*          supplied on entry, and if not, whether the matrix A should be
*          equilibrated before it is factored.
*          = 'F':  On entry, AFP contains the factored form of A.
*                  If EQUED = 'Y', the matrix A has been equilibrated
*                  with scaling factors given by S.  AP and AFP will not
*                  be modified.
*          = 'N':  The matrix A will be copied to AFP and factored.
*          = 'E':  The matrix A will be equilibrated if necessary, then
*                  copied to AFP and factored.
*
*  UPLO    (input) CHARACTER*1
*          = 'U':  Upper triangle of A is stored;
*          = 'L':  Lower triangle of A is stored.
*
*  N       (input) INTEGER
*          The number of linear equations, i.e., the order of the
*          matrix A.  N >= 0.
*
*  NRHS    (input) INTEGER
*          The number of right hand sides, i.e., the number of columns
*          of the matrices B and X.  NRHS >= 0.
*
*  AP      (input/output) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          On entry, the upper or lower triangle of the symmetric matrix
*          A, packed columnwise in a linear array, except if FACT = 'F'
*          and EQUED = 'Y', then A must contain the equilibrated matrix
*          diag(S)*A*diag(S).  The j-th column of A is stored in the
*          array AP as follows:
*          if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
*          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
*          See below for further details.  A is not modified if
*          FACT = 'F' or 'N', or if FACT = 'E' and EQUED = 'N' on exit.
*
*          On exit, if FACT = 'E' and EQUED = 'Y', A is overwritten by
*          diag(S)*A*diag(S).
*
*  AFP     (input or output) DOUBLE PRECISION array, dimension
*                            (N*(N+1)/2)
*          If FACT = 'F', then AFP is an input argument and on entry
*          contains the triangular factor U or L from the Cholesky
*          factorization A = U'*U or A = L*L', in the same storage
*          format as A.  If EQUED .ne. 'N', then AFP is the factored
*          form of the equilibrated matrix A.
*
*          If FACT = 'N', then AFP is an output argument and on exit
*          returns the triangular factor U or L from the Cholesky
*          factorization A = U'*U or A = L*L' of the original matrix A.
*
*          If FACT = 'E', then AFP is an output argument and on exit
*          returns the triangular factor U or L from the Cholesky
*          factorization A = U'*U or A = L*L' of the equilibrated
*          matrix A (see the description of AP for the form of the
*          equilibrated matrix).
*
*  EQUED   (input or output) CHARACTER*1
*          Specifies the form of equilibration that was done.
*          = 'N':  No equilibration (always true if FACT = 'N').
*          = 'Y':  Equilibration was done, i.e., A has been replaced by
*                  diag(S) * A * diag(S).
*          EQUED is an input argument if FACT = 'F'; otherwise, it is an
*          output argument.
*
*  S       (input or output) DOUBLE PRECISION array, dimension (N)
*          The scale factors for A; not accessed if EQUED = 'N'.  S is
*          an input argument if FACT = 'F'; otherwise, S is an output
*          argument.  If FACT = 'F' and EQUED = 'Y', each element of S
*          must be positive.
*
*  B       (input/output) DOUBLE PRECISION array, dimension (LDB,NRHS)
*          On entry, the N-by-NRHS right hand side matrix B.
*          On exit, if EQUED = 'N', B is not modified; if EQUED = 'Y',
*          B is overwritten by diag(S) * B.
*
*  LDB     (input) INTEGER
*          The leading dimension of the array B.  LDB >= max(1,N).
*
*  X       (output) DOUBLE PRECISION array, dimension (LDX,NRHS)
*          If INFO = 0 or INFO = N+1, the N-by-NRHS solution matrix X to
*          the original system of equations.  Note that if EQUED = 'Y',
*          A and B are modified on exit, and the solution to the
*          equilibrated system is inv(diag(S))*X.
*
*  LDX     (input) INTEGER
*          The leading dimension of the array X.  LDX >= max(1,N).
*
*  RCOND   (output) DOUBLE PRECISION
*          The estimate of the reciprocal condition number of the matrix
*          A after equilibration (if done).  If RCOND is less than the
*          machine precision (in particular, if RCOND = 0), the matrix
*          is singular to working precision.  This condition is
*          indicated by a return code of INFO > 0.
*
*  FERR    (output) DOUBLE PRECISION array, dimension (NRHS)
*          The estimated forward error bound for each solution vector
*          X(j) (the j-th column of the solution matrix X).
*          If XTRUE is the true solution corresponding to X(j), FERR(j)
*          is an estimated upper bound for the magnitude of the largest
*          element in (X(j) - XTRUE) divided by the magnitude of the
*          largest element in X(j).  The estimate is as reliable as
*          the estimate for RCOND, and is almost always a slight
*          overestimate of the true error.
*
*  BERR    (output) DOUBLE PRECISION array, dimension (NRHS)
*          The componentwise relative backward error of each solution
*          vector X(j) (i.e., the smallest relative change in
*          any element of A or B that makes X(j) an exact solution).
*
*  WORK    (workspace) DOUBLE PRECISION array, dimension (3*N)
*
*  IWORK   (workspace) INTEGER array, dimension (N)
*
*  INFO    (output) INTEGER
*          = 0:  successful exit
*          < 0:  if INFO = -i, the i-th argument had an illegal value
*          > 0:  if INFO = i, and i is
*                <= N:  the leading minor of order i of A is
*                       not positive definite, so the factorization
*                       could not be completed, and the solution has not
*                       been computed. RCOND = 0 is returned.
*                = N+1: U is nonsingular, but RCOND is less than machine
*                       precision, meaning that the matrix is singular
*                       to working precision.  Nevertheless, the
*                       solution and error bounds are computed because
*                       there are a number of situations where the
*                       computed solution can be more accurate than the
*                       value of RCOND would suggest.
*

*  Further Details
*  ===============
*
*  The packed storage scheme is illustrated by the following example
*  when N = 4, UPLO = 'U':
*
*  Two-dimensional storage of the symmetric matrix A:
*
*     a11 a12 a13 a14
*         a22 a23 a24
*             a33 a34     (aij = conjg(aji))
*                 a44
*
*  Packed storage of the upper triangle of A:
*
*  AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ]
*
*  =====================================================================
*


    
go to the page top

dpptrf

USAGE:
  info, ap = NumRu::Lapack.dpptrf( uplo, n, ap, [:usage => usage, :help => help])


FORTRAN MANUAL
      SUBROUTINE DPPTRF( UPLO, N, AP, INFO )

*  Purpose
*  =======
*
*  DPPTRF computes the Cholesky factorization of a real symmetric
*  positive definite matrix A stored in packed format.
*
*  The factorization has the form
*     A = U**T * U,  if UPLO = 'U', or
*     A = L  * L**T,  if UPLO = 'L',
*  where U is an upper triangular matrix and L is lower triangular.
*

*  Arguments
*  =========
*
*  UPLO    (input) CHARACTER*1
*          = 'U':  Upper triangle of A is stored;
*          = 'L':  Lower triangle of A is stored.
*
*  N       (input) INTEGER
*          The order of the matrix A.  N >= 0.
*
*  AP      (input/output) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          On entry, the upper or lower triangle of the symmetric matrix
*          A, packed columnwise in a linear array.  The j-th column of A
*          is stored in the array AP as follows:
*          if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
*          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
*          See below for further details.
*
*          On exit, if INFO = 0, the triangular factor U or L from the
*          Cholesky factorization A = U**T*U or A = L*L**T, in the same
*          storage format as A.
*
*  INFO    (output) INTEGER
*          = 0:  successful exit
*          < 0:  if INFO = -i, the i-th argument had an illegal value
*          > 0:  if INFO = i, the leading minor of order i is not
*                positive definite, and the factorization could not be
*                completed.
*

*  Further Details
*  ======= =======
*
*  The packed storage scheme is illustrated by the following example
*  when N = 4, UPLO = 'U':
*
*  Two-dimensional storage of the symmetric matrix A:
*
*     a11 a12 a13 a14
*         a22 a23 a24
*             a33 a34     (aij = aji)
*                 a44
*
*  Packed storage of the upper triangle of A:
*
*  AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ]
*
*  =====================================================================
*


    
go to the page top

dpptri

USAGE:
  info, ap = NumRu::Lapack.dpptri( uplo, n, ap, [:usage => usage, :help => help])


FORTRAN MANUAL
      SUBROUTINE DPPTRI( UPLO, N, AP, INFO )

*  Purpose
*  =======
*
*  DPPTRI computes the inverse of a real symmetric positive definite
*  matrix A using the Cholesky factorization A = U**T*U or A = L*L**T
*  computed by DPPTRF.
*

*  Arguments
*  =========
*
*  UPLO    (input) CHARACTER*1
*          = 'U':  Upper triangular factor is stored in AP;
*          = 'L':  Lower triangular factor is stored in AP.
*
*  N       (input) INTEGER
*          The order of the matrix A.  N >= 0.
*
*  AP      (input/output) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          On entry, the triangular factor U or L from the Cholesky
*          factorization A = U**T*U or A = L*L**T, packed columnwise as
*          a linear array.  The j-th column of U or L is stored in the
*          array AP as follows:
*          if UPLO = 'U', AP(i + (j-1)*j/2) = U(i,j) for 1<=i<=j;
*          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = L(i,j) for j<=i<=n.
*
*          On exit, the upper or lower triangle of the (symmetric)
*          inverse of A, overwriting the input factor U or L.
*
*  INFO    (output) INTEGER
*          = 0:  successful exit
*          < 0:  if INFO = -i, the i-th argument had an illegal value
*          > 0:  if INFO = i, the (i,i) element of the factor U or L is
*                zero, and the inverse could not be computed.
*

*  =====================================================================
*


    
go to the page top

dpptrs

USAGE:
  info, b = NumRu::Lapack.dpptrs( uplo, n, ap, b, [:usage => usage, :help => help])


FORTRAN MANUAL
      SUBROUTINE DPPTRS( UPLO, N, NRHS, AP, B, LDB, INFO )

*  Purpose
*  =======
*
*  DPPTRS solves a system of linear equations A*X = B with a symmetric
*  positive definite matrix A in packed storage using the Cholesky
*  factorization A = U**T*U or A = L*L**T computed by DPPTRF.
*

*  Arguments
*  =========
*
*  UPLO    (input) CHARACTER*1
*          = 'U':  Upper triangle of A is stored;
*          = 'L':  Lower triangle of A is stored.
*
*  N       (input) INTEGER
*          The order of the matrix A.  N >= 0.
*
*  NRHS    (input) INTEGER
*          The number of right hand sides, i.e., the number of columns
*          of the matrix B.  NRHS >= 0.
*
*  AP      (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
*          The triangular factor U or L from the Cholesky factorization
*          A = U**T*U or A = L*L**T, packed columnwise in a linear
*          array.  The j-th column of U or L is stored in the array AP
*          as follows:
*          if UPLO = 'U', AP(i + (j-1)*j/2) = U(i,j) for 1<=i<=j;
*          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = L(i,j) for j<=i<=n.
*
*  B       (input/output) DOUBLE PRECISION array, dimension (LDB,NRHS)
*          On entry, the right hand side matrix B.
*          On exit, the solution matrix X.
*
*  LDB     (input) INTEGER
*          The leading dimension of the array B.  LDB >= max(1,N).
*
*  INFO    (output) INTEGER
*          = 0:  successful exit
*          < 0:  if INFO = -i, the i-th argument had an illegal value
*

*  =====================================================================
*
*     .. Local Scalars ..
      LOGICAL            UPPER
      INTEGER            I
*     ..
*     .. External Functions ..
      LOGICAL            LSAME
      EXTERNAL           LSAME
*     ..
*     .. External Subroutines ..
      EXTERNAL           DTPSV, XERBLA
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          MAX
*     ..


    
go to the page top
back to matrix types
back to data types